Copyright 2018, AWE. No part of this document may be reused or duplicated without the express permission of AWE/Secor Ltd. All rights reserved. Rev1.6
Carefully align the carbon inlet with the intake box
and the mounting locations shown by the arrows
in
Figure 13
.
Reinstall the plastic screws that were removed in
Step 3
with the T25 torx driver, as shown by the
arrows in
Figure 13
.
Install the included silicone coupler onto the
carbon turbo tube using two of the included worm
clamps, as shown in
Figure12
.
Place the assembly into the engine bay and align
the three OEM rubber grommets, referenced in
Step 10
.
Gently push downward on the corners of the
intake box to affix the assembly into location.
Gently tug upward to make sure the box is
securely in place
With the AWE intake box install tighten the hose
two clamps.
Reinstall the engine cover removed in
Step 4
, as
shown in
Figure 14
.
