23
Installation
From the Installation Menu, you can access the
following sub menus:
1. COUNTRY
2. BANDWIDTH
3. MANUAL SEARCH
4. AUTO SEARCH
5. CARRIER EDIT
6. AUTOMATIC TUNING
7. FACTORY DEFAULT
COUNTRY
Set the country where the Set Top Box is being
used. The Default is Australia.
BANDWIDTH
Select the correct bandwidth for the TV carrier:
6MHz for USA
7MHz for Australia or Europe (Default)
8MHz for Europe, Asian countries
Digital TV channels and Multichannelling
Digital TV allows network operators to broadcast more than one channel per carrier
(Multichannelling). Your Set Top Box stores each network’s carrier information in the Carrier
List. The Carrier List contains information such as Carrier Center Frequency, Guard Interval
and Modulation system. The Channels contained within each Network Carrier are stored in
the TV and Radio Channel Lists. The first time you set-up your Set Top Box, you will need
to scan the entire TV band in your area to find all of the available digital TV carriers, and
then scan those carriers for the available channels. The Automatic Tuning process
performs these two steps automatically.
MANUAL SEARCH
Use the MANUAL SEARCH to re-scan the
available channels from one network carrier.
à
CARRIER CHANNEL
Select the charier channel to be re-scanned.
à
FREQUNECY
Enter the correct center frequency of the carrier
channel by using the numeric buttons on the
remote control, in kHz (6 digits).
à
NETWORK SERACH
Set to ON in order to search other carriers
belonging to the same network.
