11
Connecting to the TV via A/V
TV AERIAL
TV/VCR
ANT IN
TV OUT
RS-232
L
R
VIDEO
OUT
SPDIF
S-VIDEO
TV
RF INPUT
A/V INPUT
VIDEO L R
This method is recommended for the best picture quality. Note: RF, A/V and S -Video cables
are not supplied with the Set Top Box.
•
Make sure that both the TV and the Set Top Box are switched off at the power outlet.
•
Connect the antenna to the TV AERIAL input of the Set Top Box.
•
Connect the TV/VCR output of the Set Top Box to the RF input of the TV.
•
Connect the A/V outputs of the Set Top Box to the A/V inputs of the TV.
•
If your TV has an S -Video input connector, you can connect your TV to the Set Top Box
using an S-Video lead instead of the composite video lead. You must also connect the
Left and Right Audio cables in order to get sound.
•
Turn on the Set Top Box and the TV.
•
Select the AV input mode on the TV (refer to TV manual).
Optional audio connections
Instead of connecting the Left and Right Audio outputs to your TV, they can be connected
to your Hi-Fi stereo for better sound quality. In this case, connect the Left and Right Audio
outputs from the Set Top Box to the Left and Right Audio inputs on your Hi-Fi Stereo.
If you have a home theatre receiver with built in Dolby™ digital decoder, then connect the
SPDIF output of the digital TV Set Top Box to the SPDIF input of your home theatre
receiver.