OVERVIEW
This device is designed to convert the TVI video signals to normal CCTV signals, allowing an installer to use his
CCTV tester monitor for angle and focus adjustment during camera installation.
PACKAGE CONTENT
TVI Converter
User Manual
RCA cable
USB power cable
RCA-BNC cable
Power cable
HARDWARE
Power to
camera
Press for 3 seconds to supply power (DC12V) to the connected TVI camera;
press again for 3 seconds to stop camera power supply.
OUTPUT
Power to TVI
camera
Connect to a TVI camera with the supplied power cable for power supply.
LED indicator
(Green)
Green light flashes for 3 times when this converter is connected to power;
the light flashes again when this converter is powered on.
Green light shows when a TVI camera is connected successfully; no light
shows when the camera is disconnected.
LED indicator
(Red)
Red light flashes for 3 times when this converter is connected to power;
the light flashes again when this converter is powered on.
Red light shows when
is pressed for 3 seconds to supply power to the
connected camera; no light shows when the camera power is off.
TVI INPUT
Camera video
input
Connect a TVI camera with the supplied RCA-BNC cable.
Note: This converter only supports 1080P TVI cameras.
Zoom to focus
Press to zoom into the top left corner for focus adjustment.
INPUT
Power to TVI
converter
Connect to a mobile power bank with the supplied USB power cable for
power supply, or connect to a CCTV tester monitor for power supply if the
CCTV tester monitor supports.
This converter supports DC12V/1A and DC5V/2A power.
VIDEO OUTPUT
Camera video
output
Connect to a CCTV tester monitor with the supplied RCA cable for angle and
focus adjustment.
