Avtech AVT1105XT, User Manual

Page: 7 / 7

MENU DESCRIPTION
IMAGE MOTION ON (SOLID) AREA SEL Click

to set the area you want to detect. Up to four
areas could be configured.
The area will be masked and flashed when a motion
event occurs.
POSITION Choose
ON
to show where the area selected in
AREA
SEL
is and set the size of the area:
1. Click

and change the
size by clicking

,

,

and

.
2. Click

again and
change the size by clicking

,

,

and

.
3. Click

again to finish and exit.
SENSITIVITY Set the sensitivity for motion detection from
1
to
24
.
The larger the value, the more sensitive the detection.
COLOR Choose the color for the selected area to show when a
motion event occurs:
RED
/
GREEN
/
BLUE
/
WHITE
.
TRANS Choose the transparent level for the selected area from
1
~
8
when a motion event occurs.
The larger the value, the more transparent the area.
LSC ON / OFF Enable (
ON
) or disable (
OFF
) Lens Shading Correction
to correct the phenomenon of vignetting when the focal
length is short.
MIRROR OFF / ON Enable (
ON
) to turn the images horizontally based on
your installation situation when necessary.
BPC DYNAMIC BPC (bad point compensation) is used to compensate
dead pixels in the image.
Click

to further configure
DYNAMIC
/
STATIC W
(white) /
STATIC B
(black).
STATIC W
STATIC B
PICT ADJ SHARPNESS 0 ~ 15 Set the level of sharpness to enhance the clarity of image
detail by adjusting the aperture and sharpening the
edges.
The more the value, the sharper the image will be.
CB GAIN 0 ~ 255 Adjust the blue value.
CR GAIN 0 ~ 255 Adjust the red value.
BLACK LEVEL -128 ~ 127 Adjust the level of black.
GAMMA 0.4 / 0.45 / 0.5 Choose for gamma correction.
SYSTEM CAM TITLE OFF / ON Set the camera ID.
LANGUAGE ENG / CHI S Select the language of the menu: English / Simplified
Chinese.
FORMAT NTSC / PAL Choose to change the video system format if needed.
EXIT SAVE&END Save all the changes made and exit.
NOT SAVE Quit without saving.
RESET Reset to factory default values.