Figure A
The AVMH-1A-C can also be triggered by a TTL-level pulse applied to the TRIG input.
AMPLITUDE INTERACTION
Some properties of the output pulse may change as a function of the amplitude setting.
For some demanding applications, it may be desirable to use a combination of external
attenuators and the amplitude pot to achieve the desired output amplitude.
POLARITY INVERSION
Instruments with the "-P-PN" suffix generate up to +10V at the main output, and are
supplied with an AVX-2 inverting transformer that can be installed on the mainframe
output. A negative pulse is then obtained at the out port of the AVX-2 module.
Instruments with the "-N-PN" suffix generate up to -10V at the main output, and are
supplied with an AVX-2 inverting transformer that can be installed on the mainframe
output. A positive pulse is then obtained at the out port of the AVX-2 module.
When using the transformer with dual-polarity models with the “-OS” option, the external
offset must be added to the DC terminal of the inverting transformer. Do not apply the
offset to the rear-panel offset terminal on the mainframe (if present).
19
SYNC
(generated by the
internal oscillator)
> 10 ns
MAIN OUTPUT
PULSE WIDTH
DELAY
AMPLITUDE,
VARIABLE
3V, FIXED
Summary of Contents for AVMH-1A-C
Page 29: ...PERFORMANCE CHECK SHEET 29...