Avtech AV-110D-PS, Instructions Manual

Page: 11 / 29

Destination Region Description Option Manufacturer Part Number
United Kingdom, Hong Kong,
Singapore, Malaysia
BS 1363,
230V, 50 Hz
-AC00 Qualtek 370001-E01
Australia, New Zealand
AS 3112:2000,
230-240V, 50 Hz
-AC01 Qualtek 374003-A01
Continental Europe, Korea,
Indonesia, Russia
European CEE 7/7
“Schuko” 230V, 50 Hz
-AC02 Qualtek 364002-D01
North America, Taiwan
NEMA 5-15,
120V, 60 Hz
-AC03 Qualtek 312007-01
Switzerland
SEV 1011,
230V, 50 Hz
-AC06 Qualtek 378001-E01
South Africa, India
SABS 164-1,
220-250V, 50 Hz
-AC17 Volex 2131H 10 C3
Japan
JIS 8303,
100V, 50-60 Hz
-AC18 Qualtek 397002-01
Israel
SI 32,
220V, 50 Hz
-AC19 Qualtek 398001-01
China
GB 1002-1,
220V, 50 Hz
-AC22 Volex 2137H 10 C3
PROTECTION FROM ELECTRIC SHOCK
Operators of this instrument must be protected from electric shock at all times. The
owner must ensure that operators are prevented access and/or are insulated from
every connection point. In some cases, connections must be exposed to potential
human contact. Operators must be trained to protect themselves from the risk of
electric shock. This instrument is intended for use by qualified personnel who recognize
shock hazards and are familiar with safety precautions required to avoid possibly injury.
In particular, operators should:
1. Keep exposed high-voltage wiring to an absolute minimum.
2. Wherever possible, use shielded connectors and cabling.
3. Connect and disconnect loads and cables only when the instrument is turned off.
4. Keep in mind that all cables, connectors, oscilloscope probes, and loads must
have an appropriate voltage rating.
5. Do not attempt any repairs on the instrument, beyond the fuse replacement
procedures described in this manual. Contact Avtech technical support (see
page 2 for contact information) if the instrument requires servicing. Service is to
be performed solely by qualified service personnel.
11