background image

OWNER’S MANUAL

PRODUCT DESCRIPTION 

– The SHUTTLE MAX 12.0 bass amplifier has been designed with our unique ULTRA 

LIGHT unified design process, yielding a 1200 watt (2 x 600 watt) professional high powered tour-class bass guitar 

amplifier weighing only 6.75 lbs!  This compact design blends the best of analog and digital platforms to produce the 

ultimate in warmth, punch and power. 

The SHUTTLE MAX 12.0 is equipped with a ¼” unbalanced INSTRUMENT INPUT; input stage clip detector; MUTE 

switch with LED indicator; FET and 12AX7 TUBE preamps each with HIGH/LOW gain stage settings and 4 band 

ACTIVE equalization with 2 sweepable midrange bands; 3 switched SIGNAL SHAPE filters with level adjustments; 

MASTER VOLUME; proprietary OUTPUT LIMITER; TUNER OUT; AUX INPUT; 3 EFFECTS LOOPS; balanced 

DIRECT OUTPUT with GROUND LIFT, PRE or POST EQ; and MIC/LINE switches; HEADPHONE OUTPUT; and  2 

Neutrik NL-4 “Speakon”™ speaker jacks.

The power amp design is a powerful, lightweight Class D design and is supported by a state-of-the-art digital Switch 

Mode Power Supply (SMPS), which does away with the weight of a traditional power transformer. The SHUTTLE 

MAX 12.0 uses two 600 watt amplifier modules, both driving full output power into 4 ohms speaker loads—1200 

watts total output. The power supply is usable from 100-240 volts, lending itself well to international touring players. 

Summary of Contents for SHUTTLE MAX 12.0










Reviews: