INSTALLATION
VISUAL CHECK
After unpacking the instrument, examine to ensure that they have not been damaged in
shipment. Visually inspect all connectors, knobs, and handles. Confirm that a power
cord and an instrumentation manual (this manual), are with the instrument. If the
instrument has been damaged, file a claim immediately with the company that
transported the instrument.
POWER RATINGS
This instrument is intended to operate from 100 - 240 V, 50 - 60 Hz.
The maximum power consumption is 74 Watts (115 Watts for units with the -D option).
Please see the “FUSES” section for information about the appropriate AC and DC
fuses.
This instrument is an “Installation Category II” instrument, intended for operation from a
normal single-phase supply.
CONNECTION TO THE POWER SUPPLY
An IEC-320 three-pronged recessed male socket is provided on the back panel for AC
power connection to the instrument. One end of the detachable power cord that is
supplied with the instrument plugs into this socket. The other end of the detachable
power cord plugs into the local mains supply. Use only the cable supplied with the
instrument. The mains supply must be earthed, and the cord used to connect the
instrument to the mains supply must provide an earth connection. (The supplied cord
does this.)
Warning: Failure to use a grounded outlet may result in injury or death due to
electric shock. This product uses a power cord with a ground connection. It must be
connected to a properly grounded outlet. The instrument chassis is connected to the
ground wire in the power cord.
The table below describes the power cord that is normally supplied with this instrument,
depending on the destination region:
10
Summary of Contents for AV-110D-PS
Page 29: ...PERFORMANCE CHECK SHEET 29...
