AVTECH ELECTROSYSTEMS AVG-4A-B, Instructions Manual

Page: 22 / 38

AVAILABLE OPTIONS
-M OPTION
This option provides a monitor output, which is an attenuated replica of the main output.
The monitor is connected to the main output through a 450 Ohm resistor, which results in
an attenuation of approximately 20 dB (i.e., ÷10) when the monitor output is terminated
with a 50 Ohm load.
For models with the “-OS” option, the monitor output does include the effect of the added
offset.
The monitor output should be terminated with a 50 Ohm load.
-OS OPTION
This option allows an externally generated DC offset to be added to the output. The
desired DC offset is applied to the back panel OS terminal, which is connected to the
output centre conductor trhough a high-quality RF inductor. Do not exceed 50V, 250 mA.
22