Page 7
Note: For momentary output you must turn off TIMED OUTPUT first (see page 5) and also turn on PULSED OUTPUT
(see page 4)
MOMENTARY OUTPUT
1.
Enter programming mode (see page 3)
2.
Press button 3 repeatedly until the channels lights are all on as
shown.
3.
Press button 2 repeatedly until the
feature
lights indicate the
desired channel for momentary operation.
Press button 1 to swap the feature light(s) between flashing
and not flashing.
Flashing
Not Flashing
4.
Momentary Output
off.
Momentary Output
on.
5.
Press and hold button 2 on the remote control until the lights
start scrolling.
The output has now been programmed.
OR
