- 31 -
SPIDER PA Signalling
SPIDER PA WS Signalling
SPIDER PA have a buzzer and a Led for
visual-acoustic signalling (Walk Test)
even if the detector is blocked using B.
At power up, buzzer and led flash for 30
seconds during circuit warm-up
To exclude the
LED remove S2
To exclude the
BUZZER remove
S1
SPIDER PA WS is equipped with a buzzer
and a Led to give out an optical-acoustic
signalling (Walk Test).
To exclude the
LED remove S3
To exclude the
BUZZER
Dip switch 8
At first supplying, SPIDER PA W is blocked
for about 2 minutes, during this time both
buzzer and led emit an intermitting signal-
ling .
SPIDER DUAL Signalling
SPIDER DUAL is equipped with a buzzer and
a Red Led in order to give an optical-acoustic
signalling (WalkTest) even if the block is active
on the detector.
Furthermore it is equipped with a yellow Led
which is active in case of microwave masking.
At first supplying, SPIDER DUAL is
blocked for about 30 seconds, during this
time both buzzer and led emit an intermitting
signalling.
To exclude YELLOW
LED - jumper S5.
Pay attention to the fact
that by exclusion of Led,
the anti-mask output is
automatically excluded
too.
To exclude RED LED and
BUZZER - Jumper S1
E
N
G