- 35 -
LED
Yellow
Steady:
Fast flashing:
Slow flashing:
Flashing:
P a s s i ve i nfra re d a la r m
signal
Antimask alarm signal
Dirty lenses fault signal
Alternately with red LED for
about 60 seconds at first
feeding
Red
Steady:
Flashing:
General alarm signal
Alternately with yellow LED
for about 60 seconds at
first feeding
Green
Steady:
Microwave section alarm
signal
Trimmer for
adjusting
microwave capacity,
increases
when turned
clockwise
Buzzer for
alarm signalling
ON
1 2 3 4
5 6 7 8
ON
1 2 3 4
5 6 7 8
2.7
2.2
1.5
MW
1.0
SW1
SW2
USB
GIALLO
ROSSO
VERDE
Connector for connecting the module mod.
USB-OUT
(item 1135105) for direct handling of
the sensor by way of the PC.
With the
USB-OUT
adapter it is possible to
connect the sensor directly to the PC for managing
through the
HPWIN
software.
In the DIP/RELAY mode:
through this connection
it is possible to display the configuration made
by way of the DIP SWITCH, display actual sensor
operation and acquire the download of the last
1920 events to the pc.
In PC/BUS mode:
through this connection it is
possible to display and modify the configuration,
even is previously completed by way of DIP
SWITCH, adjust microwave sensitivity, display
actual sensor operation and acquire the download
of the last 1920 events to the pc.
SW 1
: See next page
SW2 - FUNCTIONS
1
ON
Connection by DIP/RELAY
OFF
Connection by PC/BUS
2
ON
Buzzer enabled
OFF
Buzzer excluded
3
ON
Red LED enabled
Alarm
OFF
Red LED excluded
Alarm
4
ON
Green LED enabled
Microwave
OFF
Green LED excluded
Microwave
5
ON
Yellow LED enabled
Antimask
OFF
Yellow LED excluded
Antimask
and
Dirty lenses
6
ON AUX
input activates Alarm relay
OFF AUX
input activates Tamper relay
7
ON Antimask
function enabled
OFF Antimask
function excluded
8
ON AUX
input management enabled
OFF AUX
input management disabled
IMPORTANT: In the mode withPC/BUS,
the functions configurable through DIP
SWITCH SW2 cannot be modified through
the PC except for the ANTIMASK function
(DIP 7)
DEFAULT
DIP SWITCH
1
2
3
4
5
6
7
8
ON
ON
ON
ON
ON
OFF
ON
ON
E
N
G
