- 32 -
Fixing the base to the plate
Fixing the base to the joint
1.
Hook the base of the sensor to
the two stops on the lower portion
of the metal plate
For installation with
joint, do not use the
metal plate on the
bottom of the sensor
2.
Fix the base of the sensor to
the metal plate using the two
screws provided
Anti-tamper Installation
With joint
Fixing point for
tamper module
Point for
inserting tamper
With plate
Presettings for access of
connection wires
Knock out hole for connection
cable access
Screws supplied for fixing
the sensor to the joint
Knock-out holes for
fixing the base of
the sensor to the
joint
Have the wires exit the
anti-tampering module
from the side notch
E
N
G
