AVProEdge ConferX AC-CX100-RAMP, User Manual, Page: 11 / 20


SETUP AND CONTROL
From the Web Interface, you can turn view and change system information
• POWER: Turn the AC-CX100-RAMP ON/OFF
•
SYSTEM ADDR: If utilizing more than one AC-CX100-RAMP each must have it's own unique address (01, 02, 03,
etc. default is 01)
• DHCP: Turn DHCP ON/OFF (default is off)
o
DHCP can be Enabled/Disabled by pressing and holding the HDMI and ARC buttons on the front panel
under AUDIO SELECT at the same time for 3 seconds. The AUDIO SELECT lights will flash ONCE if DHCP
is enabled and TWICE if it is disabled (Static IP Address).
*NOTE: The device will REBOOT automatically after this setting is changed.
AC-CX100-RAMP
Page 11