AC-EX
7
0-444-KIT
■
RS-232
Configuration
RS
-
232 can be used to pass control signals bi-directionally to & from any
RS
-
232 compatible device. This is commonly used to rout
e
control
signals
in the following way:
1.
Control System --> Display/Projector (ie, Power On/Off)
2.
Display/Projector --> Control System (ie, Display Status, Volume
Status etc...)
3.
When ultra long-range serial communication
is needed (think
concerts, live events
). U
se the extender.
The unit comes with 3 pin
connectors t
o allow for any wire an
integrator would like. The pin out
configuration Left=TX,
Center=Ground, Right=RX and
looks like this:
This is how
the
cable
should
look.
If using the AC-CABLE-3.5-DB9F
(Female) or AC-CABLE-3.5-DB9M
(Male)
, the colors will be the same.
With any other cable, please follow
Tx, G, Rx as shown above.
A
RS-232
c
able
p
reparation diagram
is on the next page.
pg. 1
4
AVProEdge
~
2222 E 52nd Street N Sioux Falls, SD 57104
~ 1.877.886.5112 ~ +1.605.274.6055 ~
support@
avproedge
.com
