AC-EX
7
0-444-KIT
■
IR Configuration
IR can be used in
three
ways:
1.
From Rack (Control System Direct):
Plug a MONO 3.5mm cable
into
an emitter port of any control system directly into the "
IR IN"
p
ort on the
AC-EX
40
-
444
Transmitter to pass IR
s
ignals directly to the remote
end.
NOTE - Be sure the IR
MODE Slide Switch is set to "I-PASS" on the
Transmitter
2.
From Rack (Using IR-EYE):
Plug an IR-Receiver Eye
in
to the "IR IN" of
the AC-EX40-444 Transmitter
in order to pass
infrared signals generated
f
ro
m a
device
or
IR Remote. NOTE - Be sure the IR MODE Slide Switch is
set to "IR-EYE" on the Transmitter
.
3.
From Remote End:
Use an
IR
-Receiver Eye
on the AC-EX
40
-
444
Receiver (IR In Port)
in order to
sen
d
IR
s
ignals BACK to the rack and
out
of the TRANSMITTER IR Out Port with a
n emitter
.
pg. 1
6
AVProEdge
~
2222 E 52nd Street N Sioux Falls, SD 57104
~ 1.877.886.5112 ~ +1.605.274.6055 ~
support@
avproedge
.com
