![AVProEdge AC-MX88-AUHD-NSFS User Manual Download Page 2](http://html1.mh-extra.com/html/avproedge/ac-mx88-auhd-nsfs/ac-mx88-auhd-nsfs_user-manual_3033966002.webp)
The AC-MX88-AUHD-NSFS is a true 18Gbps 4K60 (4:4:4) 8x8 HDMI matrix switch. Supporting HDMI
2.0(a/b), HDCP 2.2, up to 4K video resolution, and up to 18 Gbps bandwidth. This switch allows any
source (Blu-ray, UHD Blu-ray, satellite receiver, game consoles, PCs, etc ... ) to be shown on any of
the connected displays. This matrix equalizes and amplifies the output to ensure the HDMI signal
can be transmitted through long HDMI cables without loss of quality.
This matrix was built with switching speed in mind. With the introduction of high bandwidth 4K,
switching times increase because of all the added data compared to legacy resolutions like 720p or
1080i/p. In this unit we have removed scaling control and audio delay control in order to give the
integrator the fastest possible switching time in a 18Gbps switch. Welcome to the NSFS.
This is an ideal solution for digital entertainment centers, HDTV retail, show sites, data centers,
schools, conference and training centers and more!
Features:
•
HDMI 2.0
(a/b)
•
4K60 4:4:4 Support
•
Full HDR Support
(HDR 10 & 12 Bit)
•
Dolby Vision, HDR10+ and HLG Support
•
HDCP 2.2 (and all earlier versions
supported)
•
Advanced EDID Management
•
IR, RS-232 and LAN Control Options
•
Audio De-Embedding via SPIDF & 3.5mm
jack
•
Driver Support for Crestron, C4, RTI, ELAN
and more!!!
Easy to use:
•
Install in seconds
•
Feature rich
•
Powerful EDID management
•
Front Panel Control
•
IR Remote
•
IR & RS-232 Control
•
LAN Control
In The Box:
•
AC-MX88-AUHD-
NSFS
(
Matrix Switch
)
•
IR Remote Control
•
IR Extension Cable
•
12V/4A Locking Power Supply
Quick Installation:
1.
Connect the HDMI input sources (Blu-ray, Set Top Box, etc...) to the AC-MX88-AUHD-
NSFS
.
2.
Connect the HDMI output devices (AVR, Display, Distribution Amplifier, Extender) to
the AC-MX88-AUHD-
NSFS
.
3.
Power on the sources.
4.
Connect the power supply into the AC-MX88-AUHD-
NSFS
.
5.
Turn on output devices/displays.
6.
Use the front panel controls, supplied IR remote or free PC software to control the
switch.
Introduction
:
AC-MX88-AUHD-NSFS
Page 2
Summary of Contents for AC-MX88-AUHD-NSFS
