8
Read EDID from output y and write to User EDID n of input
x – (n = 1 to 3)
>@WEWI[x]U[n]O[y]
Read EDID from output y and write to User EDID n of
All inputs – (n = 1 to 3)
>@WEWIAU[n]O[y]
Get Status Information
Output a report giving the current status of the matrix switcher (2)
>@RSTA
Read the input connection status (4)
>@R8001
Read the output connection status (4)
>@R8002
Read input HDCP status (4)
>@R8003
Read output HDCP status (4)
>@R8004
Read output channel settings (4)
>@R8006
Read output On/Off states (4)
>@R8007
Read External (de-embedded) audio status (4)
>@R8008
Read input EDID setting (4)
>@R8009
Read all network settings (5)
>@R8012
Read cascade mode status (4)
>@R8017
Set Cascading Mode
Turn cascading mode on
>@WSDBGEN
Turn cascading mode off
>@WSDBGDIS
Other Commands
Power off the matrix switcher (enter standby mode)
>@WSPF
Power off the matrix switcher (exit standby mode)
>@WSPN
Help, list all available commands (2)
>@RH
Reset to factory defaults
>@WSDF
Notes:
(1)
This command generate a large report giving detailed information about the current
status of the matrix switcher.
(2)
This command lists all the commands that the matrix switcher supports.
(3)
These EDID commands output an ASCII data block that lists the values of the requested
EDID data values in hexadecimal notation.
(4)
These commands respond with a short message, usually one line, giving the requested
information.
(5)
The IP status command will respond with all the current IP settings: Host IP address,
Subnet mask, Router IP address, TCP/IP port number and the DHCP setting.
AC-MX44-UHD & AC-MX88-UHD
AVProConnect
