5
EDID Setting
The matrix switcher has 12 built-in factory defined EDID setting, and three user programmable
EDID memories. The user EDID memories are independent to each input and can therefore be set
differently for each input. The matrix switcher can also be set to use the EDID information from any of
the output display devices.
To change the EDID setting, press and hold any INPUT button for 3 seconds and the LCD display will
show the current EDID setting for that input channel.
The EDID setting will be one of the following:
1
：
1080P 2CH (PCM)
2
：
1080P audio 5.1
3
：
1080P audio 7.1
4
：
1080P 3D 2CH (PCM)
5
：
1080P 3D audio 5.1
6
：
1080P 3D audio 7.1
7
：
4K30Hz 3D 2CH (PCM)
8
：
4K30Hz 3D audio 5.1
9
：
4K30Hz 3D audio 7.1
10
：
4K60Hz (Y420) 3D 2CH
(PCM) 11
：
4K60Hz (Y420) 3D
audio 5.1 12
：
4K60Hz (Y420) 3D
audio 7.1 USER EDID 1
USER EDID 2
USER EDID 3
EDID from output 1
EDID from output 2
EDID from output 3
EDID from output 4
The first twelve EDID settings are factory set and cannot be altered. The three USER EDID memories
can only be programmed using RS232 commands. The EDID from any output can be programmed
either using the front panel controls as described below, or by using RS232 commands. Each input
presents its currently selected EDID setting to the HDMI source device, therefore only one EDID
setting is active at any instant for an input, but this setting can be different for each input.
The following is an example of how to change the EDID setting for input 3:
User Action
LCD Text after User Action
Press and hold button 3 for 3 seconds
.
Click button 3 to step to the next EDID setting.
(This step can be repeated until the desired EDID
setting is displayed)
AC-MX44-UHD & AC-MX88-UHD
AVProConnect
