7
RS232 Commands
The
AC-MX44-UHD & AC-MX88-UHD
can also be controlled using RS232 commands, and some
configuration settings can only be performed using RS232 commands.
The serial port settings should be set to: 57600,n,8,1 (baud: 57600, no parity, 8 data bits and 1 stop bit)
with no handshaking.
In each of the following RS232 command the
symbol represents the carriage-return character
(0x0d). Where shown for a particular command, the square brackets [] are required for that command.
The commands normally reply with the same command that was sent, but with the fist character
pointing left: e.g. the command:
>@WVSO[1]I[2]
gives the command response:
<@WVSO[1]I[2]
Video Selection Commands
Change the input and output signal routing:
Where x is the input number and y is the output number.
>@WVSO[y]I[x]
Set input x to all outputs
>@WVSOA[x]
Turn output y off
>@WVSO[y]OFF
Turn output y on
>@WVSO[y]ON
External (De-Embedded) Audio Commands
Enable external (de-embedded) audio for output y
>@WASO[y]E EN
Disable external (de-embedded) audio for output y
>@WASO[y]E DIS
Enable All external (de-embedded) audio outputs
>@WASOAEON
Disable All external (de-embedded) audio for outputs
>@WASOAEOFF
IP Set-Up Commands
Set the Host IP address of the matrix
switcher (Default: 192.168.001.239)
>@WIPH xxx.xxx.xxx.xxx
Set the subnet mask
(Default: 255.255.255.000)
>@WIPN xxx.xxx.xxx.xxx
Set the Router IP address (Default:
192.168.001.001)
>@WIPR xxx.xxx.xxx.xxx
Set the TCP/IP port
number (Default: 23)
>@WIPH zzzzz
Set DHCP on
>@WIPDP ON
Set DHCP off
>@WIPDP OFF
EDID Commands
Read the current EDID information from input x (3)
>@R8010[x]
Read the current EDID information from output y (3)
>@R8011[y]
Set input x to EDID from output y
>@WECO[y]I[x]
Set All inputs to EDID from output y
>@WECO[y]A
Set input x to Default
EDID
n
– (n = 1 to 12)
>@WECD[n]I[x]
Set All inputs to Default
EDID
n
– (n = 1 to 12)
>@WECD[n]A
Set input x to User
EDID
n
– (n = 1 to 3)
>@WECU[n]I[x]
Set All inputs to Default
EDID
n
– (n = 1 to 3)
>@WECU[n]A
AC-MX44-UHD & AC-MX88-UHD
AVProConnect
