The
AVS-VCO-1
Voltage
Controlled
Oscillator
User Guide
Thank you for purchasing from AvonSynth
Congratulations on your purchase of a brand new AvonSynth AVS-VCO-1
Voltage Controlled Oscillator Eurorack Module. We trust that it will both
serve and inspire you as you create beautiful music with it for years to come.
In order to get the most out of your module, please ensure that you read
this User Guide in its entirety so that you fully understand all of its
functionality, and that you follow all necessary safety directions during use.
Included in the Box
Page 1 of 4
1 x VCO Module
1 x 10 pin to 16 pin
fl
at-cable power cord
4 x M3 Mounting Screws
4 x Nylon Washers
Installation
Step 1: Power your system o
ff
. Place the module in your Eurorack-
compatible rack in any convenient position. A
ffi
x the module to your
rails using the included mounting screws and nylon washers.
Neglecting to use these washers may result in unnecessary marking
of the unit.
Step 2: Triple check the polarity of the power connector before
connecting the power cord to your power supply. Ensure that the -12v
line marked on the back of the module connects to the same end of
the
fl
at-cable that also connects to the -12v line on your power supply.
While AvonSynth modules use shrouded connectors that make this
process safer and more reliable, some systems do not conform to this
polarity standard, so careful checking is
always
necessary.
Connecting the module with incorrect polarity can result in damage
done to the module which cannot be covered by warranty.
Step 3: Power up your system and start patching!
www.AvonSynth.com
4 x Nylon Washers
Step 1: Power your system o
ff
. Place the module in your Eurorack-
compatible rack in any convenient position. A
ffi
x the module to your
rails using the included mounting screws and nylon washers.
Neglecting to use these washers may result in unnecessary marking
of the unit.
Step 2: Triple check the polarity of the power connector before
connecting the power cord to your power supply. Ensure that the -12v
line marked on the back of the module connects to the same end of
the
fl
at-cable that also connects to the -12v line on your power supply.
While AvonSynth modules use shrouded connectors that make this
process safer and more reliable, some systems do not conform to this
polarity standard, so careful checking is
always
necessary.
Connecting the module with incorrect polarity can result in damage
done to the module which cannot be covered by warranty.
Step 3: Power up your system and start patching!
Congratulations on your purchase of a brand new AvonSynth AVS-VCO-1
Voltage Controlled Oscillator Eurorack Module. We trust that it will both
serve and inspire you as you create beautiful music with it for years to come.
In order to get the most out of your module, please ensure that you read
this User Guide in its entirety so that you fully understand all of its
functionality, and that you follow all necessary safety directions during use.
