7.
In case of a failed return, check the following:
• Brackets in the code. Have you copy and paste the first and the last bracket?
• Syntax errors in the code/ correct numbers in the key values. Some camera settings are having
a specific range. The SRT key for example has a range of 0 - 32. If you have typed 33 it would
exceed the range of this key.
• No long white spaces between the key values of the code. For example this " code " is error
and this "code" is right.
• If you have typed the correct IP address of the camera.
8.
If you have done it correct, you can check the settings you have changed in the WebGUI of the
camera.
Curl
It is also possible to change the camera settings at once by using the
Command Prompt
from Windows.
Follow instructions below:
1.
Click on
Start
in the left corner of your screen in Windows.
2.
Type
Notepad
and open this application.
3.
Copy and paste the following http link:
and the
code
in
Notepad
.
4.
Type
curl
, change the default IP address in the IP Address of your camera, and surround it by
quotation marks.
5.
Add
--data-raw
between the http link and the code.
6.
Type
szCmd
and surround it by quotation marks.
7. Double
the quotation marks between the brackets! See the example below.
8.
Modify the parameters in the code. In the example above
EmAFmode:3
and
nChannel:0
See the
9.
Click on
Start
in Windows again, type
CMD
and press
Enter
.
10.
Copy and paste the link/ code from notepad in
Command Prompt
and press
Enter
.
11.
If correct it returns: {"nRetVal":0, "szError":""}
70
Summary of Contents for CM70-IP
Page 68: ...APPENDIX B DIMENSIONS 68...