VIDEO - OSD
Figure 30: WebGUI > VIDEO > OSD
In this area, you can put a camera name and time as overlay on the IP stream (the overlay feature is exclusively
available on the IP stream, not on other outputs).
Note that only the output of the camera will be shown with the main stream set to H264.
Fields
You can enable or disable
Show Time
and
Show Title
can be enabled or disabled by marking or unmarking
the checkbox next to the respective setting (the time and name settings can be found under the tab
SYSTEM
,
sections
Attributes
and
Time
).
You can use the dropdown menus
Time Font Color
and
Title Font Color
to set the desired font colors.
You can use the directional arrows on the right to move the title and time to the preferred position on the screen.
OSD Font Size (related to Camera Name and Time)
You can use
Scale size automatically
for both main stream and sub stream. If checked, the camera name and
time overlay will always scale with the image, keeping the proportions intact.
Click
SAVE
to apply your settings. A small confirmation dialogue appears in the bottom right corner.
33
Summary of Contents for CM70-IP
Page 68: ...APPENDIX B DIMENSIONS 68...