33
The Avonic IP camera is implemented with a TCP server. The TCP port number is 1259 by default and can
be altered in the WebGUI. Once the connection between client and server is set up, the client will be able
to send PTZ commands to the server. The server then parses and executes the PTZ command.
The Avonic IP Camera also has an implemented UDP server. The UDP port number is fixed on 1259. Once
the connection between client and server is set up, the client will be able to send PTZ commands to the
server. The server then parses and executes the PTZ command.
The VISCA over IP command list is based on the VISCA protocol. Not all VISCA commands are implemen-
ted.
The PTZ Command format is according to the definition of the VISCA protocol. The VISCA address of the
camera is set to 1 by default and can be changed in the WebGUI. As all cameras are uniquely identified
by their IP address, all VISCA addresses of the cameras that are controlled over IP do not necessarily have
to be unique.
Default settings:
TCP port
1259
UDP port
1259 (same port as TCP; is correct)
VISCA address
1
Replace the ‘1’ in all the ‘81’ addresses with the serial Visca address set in the camera to control it.
VISCA OVER SERIAL PROPERTIES
VISCA OVER IP PROPERTIES AND COMMAND LIST
www.avonic.com
