AVOCOR VTF-6500, Installation & Operation Manual

Page: 5 / 79

5

If metal or liquid gets into the display, it may cause a fire or an electrical shock.
 Don’t install or remove the power plug with wet hands.

This may cause an electrical shock.

If the display will not be used for a long period of time, unplug the display.

This may cause premature wear of electrical components or fire.
 Don’t press on the LCD panel.

This may cause personal injury or panel damage.

Don't push or shake the display.

This may cause damage or injury.

If the glass of the display panel is broken, liquid may escape. Please don't touch the liquid.

If liquid get into your eyes or touches your skin, wash with the clean water and seek medical
attention immediately.

Precautions with the remote control batteries

Please only use approved AAA type batteries.

Please be sure to insert batteries by matching the + and -.
 Don’t recharge, heat, disassemble, short or throw batteries into a fire.
 Don’t mix a new battery with a used one.
 Don’t mix different types of batteries together (only use the specified type). it may cause burn and injury.
Cleaning

If dust has collected on the power plug, removed the plug from the outlet and clean off the dust.

Dust build-up may cause a fire.

Take off the power plug before cleaning.

Failure to do so may result in electrical shock or damage.

Cleaning the surface of the display

When the surface of the display becomes dirty, please wipe the surface lightly with a soft clean cloth.

If the surface requires additional cleaning, lightly moisten the cloth.

Do not to let any kind of liquid enter the display as it may cause electrical shock or damage.

Do not clean the display with alcohol, solvents or ammonia, as this could damage the display.