Avnet COM Express MSC C6B-SLH User Manual Download Page 8

Page: 8 / 144

MSC C6B-SLH

MSC C6B-SLH User Manual

8 / 144

1 User Information

1.1 About this Manual

This user’s guide provides information about the components, features
and connectors available on the MSC C6B-SLH COM Express

Compact Module.

1.2 Symbols and Signal Words

Safety Messages: Danger, Warning and Caution

No safety messages used in this manual, due to high compact module
security. The following paragraph shows the usual MSC standard.

Signal words call attention to a safety message and designate a degree
or level of hazard seriousness.

Signal word

Degree of hazard seriousness

Danger

Indicates a hazardous situation that, if not avoided,

will result in death or serious injury.

Warning

Indicates a hazardous situation that, if not avoided,

could result in death or serious injury.

Caution

Indicates a hazardous situation that, if not avoided,

could result in minor or moderate injury.

All safety messages have a safety alert symbol and are structured as
follows:

Danger, Warning or Caution

Type of hazard

Potential consequences of the hazard

Evasive or avoidance actions to be taken

Notice

Notices contain important information that should be observed. In case
of neglect the board can be damaged. All notices have the



-symbol

and are structured as follows:



NOTE:

Notice text.

1.3 Table Cells with Gray Text

Cells with gray text contain information that is not supported on this
board.

Summary of Contents for COM Express MSC C6B-SLH

















































































































































Search results

Summary of Contents for COM Express MSC C6B-SLH

Reviews:

Related manuals for COM Express MSC C6B-SLH

Brands by name

Popular brands

Avnet COM Express MSC C6B-SLH, User Manual

Search results

Summary of Contents for COM Express MSC C6B-SLH

Reviews:

Related manuals for COM Express MSC C6B-SLH

Brands by name

Popular brands