manualshive.com logo in svg

AVMATRIX PVS0605, User Manual, Page: 22 / 22

Share
Download
AVMATRIX PVS0605 User Manual Download Page 22

                                                                                                                            www.avmatrix.net

 

20 

6.5.2 SD Card Install and Uninstall 

1. Install SD card:   

First, format SD card to exFAT/ FAT32 file system format. Install Plug and press the SD card into the slot 

from the side of video switcher. Wait 3 sec, the LED indicator beside it will turn on.   

2. Uninstall SD card: 

Press the card to take it out. Use a card reader to play or copy the video files in a computer.

 

6.5.3 Recording Control

 

Press REC button start recording. Meantime, the key indicator turns on. During recording, press PAUSE 

button the recording pause, and press PAUSE button again recording continue. Press REC button, 

recording stops and save the video file to SD card. Record video resolution is same to SDI PGM output 

resolution. The recording status shown beside the menu, including information of REC mark, recording 

time, available storage.   

Note:   

1. The record file will be saved to SD card only after pressing the REC button to stop recording. Otherwise, 

the record file might be corruption. 

2. In case the switcher is power off during record, the record file might be corruption. 

3. If you want to change the PGM output resolution during recording, please stop recording and save the 

file first, then new record the video in new resolution. Otherwise, the record video files in SD card will be 

abnormal. 

6.5.4 Recording Settings 

Access to the recording settings in main menu, and set the encoding format of the recording between 

VBR and CBR. User can also choose the video recording quality they need, there is Ultra High, High, 

Medium, Low for choice. 

Summary of Contents for PVS0605























Reviews:

No comments