manualshive.com logo in svg

AVMATRIX PVS0605, User Manual, Page: 15 / 22

Share
Download
AVMATRIX PVS0605 User Manual Download Page 15

                                                                                                                            www.avmatrix.net

 

13 

2) Video Format Supporting 

FLV 

MPEG4(Divx), AVC(H264), FLV1 

MP4 

MPEG4(Divx), MPEG4(Xvid), AVC(H264), 

HEVC(H265) 

AVI 

MPEG4(Divx), MPEG4(Xvid), 
AVC(H264), HEVC(H265), MPEG2 

MKV 

MPEG4(Divx), MPEG4(Xvid), AVC(H264), 

HEVC(H265) 

MPG 

MPEG1 

MOV 

MPEG4(Divx), AVC(H264), HEVC(H265) 

3) Image format support: BMP, JPEG, PNG. 

4.4 Transition Effects 

4.4.1 MIX Transition 

Pressing the 

  MIX button selects a basic A/B Dissolve for the next transition. When button LED 

turns on it is active. Then use T-Bar or AUTO to operate the transition. The MIX transition effect as below   

 

 

4.5.2 WIPE Transition   

 

WIPE is a transition from one source to another and is achieved by replacing the current source by 

another source. Press the 

  WIPE button and the LED turns on then it is active. There are total 9 

WIPE selections wiping start from different directions. Such as if choosing 

, then use T-Bar or AUTO 

to operate the transition, the WIPE effect as following:   

 

 

 

 

INV 

  button is an alternative button. Press it first and then press a Direction button, the WIPE will 

start from an inverse direction. 

4.4.2 FADE Transition   

Fade is a transition from one source to another with fade gradually transition effect. Press the FADE 

  button and use T-Bar or AUTO to operate the FADE transition. 

Summary of Contents for PVS0605























Reviews:

No comments