AVM Fritz!Box Fon WLAN7170 Page 79 Installation, Configuration And Operation Download

Page: 79 / 140

FRITZ!Box

Disabling the Setting “All computers are located in the same IP network”

This the following address pools are available to the DHCP
server:

Computers connected with the FRITZ!Box via different inter-
faces are located in different subnets.

Disabling the Setting “All computers are located in the
same IP network”

Proceed as follows to open the DHCP server settings:

Open the FRITZ!Box user interface (see the section
“Opening the User Interface” from page 30).

Click “Expert Mode” in the “System” menu, enable the
setting “Show expert settings” and confirm this set-
ting by clicking “Apply”.

Open the “System / Network Settings” menu.

Click the “IP Addresses” button.

The “IP Settings” page is opened. Here you can
change the setting “All computers are located in the
same IP network”.

Interface

Address Pool of the DHCP Server at the Interface

LAN 1

192.168.178.20 - 200

LAN 2

like LAN 1

LAN 3

like LAN 1

LAN 4

like LAN 1

WLAN

192.168.182.20 - 200

Interface

Address Pool of the DHCP Server at the Interface

LAN 1

192.168.178.0

LAN 2

like LAN 1

LAN 3

like LAN 1

LAN 4

like LAN 1

WLAN

192.168.182.0

F!BoxFonWLAN-7170v2-e.book Seite 79 Freitag, 23. November 2007 3:41 15

Summary of Contents for Fritz!Box Fon WLAN7170













































































































































Search results

Summary of Contents for Fritz!Box Fon WLAN7170

Reviews:

Related manuals for Fritz!Box Fon WLAN7170

Brands by name

Popular brands

AVM Fritz!Box Fon WLAN7170, Installation, Configuration And Operation

Search results

Summary of Contents for Fritz!Box Fon WLAN7170

Reviews:

Related manuals for Fritz!Box Fon WLAN7170

Brands by name

Popular brands