FRITZ!Box
105
Saving New Settings
Saving New Settings
In this section, saving refers to all current settings. It is not
necessary to save the configuration after each setting is
made. You may first configure all of your FRITZ!Box’s set-
tings as desired, and then save them permanently.
Saving Permanently
Permanent saving cannot be reversed. However, you can re-
set the PBX to its factory settings or program it with differ-
ent settings.
Disabling Automatic Outside Dialing
Call Waiting Option
Call waiting can be switched on or off for each extension.
Some older terminal equipment connected to extensions
may misinterpret the call waiting signal. This is especially
true of fax machines and modems. If communication errors
occur, you should disable call waiting for fax and modem
extensions.
See section “Call Waiting” on page 121 for information
about how to accept a call while another connection is ac-
tive.
N
Pick up the handset.
r91ss
Save all settings made to your FRITZ!Box perma-
nently by dialing the sequence shown at left.
O
Hang up the handset.
N
Pick up the handset.
r1
Ext.
s0s
Dial the sequence shown at left.
r91ss
Save your settings if desired by
dialing the sequence shown at
left.
O
Hang up the handset.
F!BoxFonWLAN-7170v2-e.book Seite 105 Freitag, 23. November 2007 3:41 15
