AVM CD 30.3, Operating Instructions Manual, Page: 8 / 19

8
1.5 Power connection
Connect the supplied power cable to the power supply connection (22) and plug it into a
shockproof socket.
NOTE : Please leave the device switched off for the time being (power switch (23) in zero
position) until you have established all cable connections to the rest of the system.
1.6 Connecting a preamplifier or integrated amplifier
Connect the analog outputs (14-16) to the amplifier inputs using suitable cables. XLR and RCA
outputs are mutually decoupled and can be used as desired.
If possible, we recommend a balanced connection via the XLR outputs (14, 16), especially for
longer connection lengths. Unbalanced RCA/RCA cables can also make excellent connections
in terms of sound quality - provided you use a sufficiently shielded cable of high quality.
1.7 Connecting digital sources and recording devices
Digital sources
Connect digital signal sources to the optical (19) or coaxial (20) digital inputs, to the AES/EBU
digital input (21) using a suitable cable.
Digital recording devices
If you want to record digitally, you can connect your recording devices (computer, CD recorder)
to the digital outputs (17, 18). Depending on the selected source, the output socket carries the
corresponding signal (dig in coax, dig in opt. etc.).
1.8 RC 3 remote control
The RC 3 remote control included in the scope of delivery allows you to control your CD 30.3
comfortably. Optionally, the RC 8 remote control is also available from us. This remote control
with its numeric keys allows you to control the CD player more comfortably.
The
OFF and ON keys are common for all AVM devices in the system and switch them off and
on.
The
STOP , PLAY and < SKIP > keys are used for drive control. The PLAY key switches
between
PLAY
and
PAUSE
when pressed several times, the
STOP
key ejects the CD when
pressed several times. The keys < SKIP > switch to the next / previous track of a CD when
pressed briefly - when pressed longer, the search through the current track is accelerated.
Pressing the keys <
STATION
> switches the digital inputs. If a digital input is selected,
pressing the
PLAY
key will select the CD player. If a variable volume level is activated in the