
13
AUTO-PLAY function
If the CD player is not selected as source, the CD 30.3 automatically switches to CD mode
when a CD is inserted and reads the CD. If this autoplay function is activated (see section 3.1.2)
the playback process will start automatically afterwards.
Playing CDs
If a CD is inserted, start the playback process by pressing the
PLAY/PAUSE
key (10). Press
this key again to pause the CD 30.3. A further press resumes the playback process. Pressing
the
STOP
key (10) stops the playback.
The respective operating status (
PLAY
,
PAUSE
,
STOP
) is shown in the display (7).
2.11
Function of the SKIP keys
With the
SKIP
keys (11, 12) you can select a certain title during
PLAY
or
STOP
(short tap), or
search for a certain position within the current title by pressing and holding for a longer time
during playback. These keys have no function in the
PAUSE
state.
NOTE:
A fast search across title boundaries is not possible, so the search stops automatically
at the end of the current title and switches to the
PAUSE
state.
2.12
Repeating CD tracks (Repeat)
By pressing the
REPEAT
button (5) you can select whether either the current track (press once)
or the entire CD or programmed sequence (press twice) is repeated. The selected setting is
shown on the right side of the display (
RP ONE
/
RP ALL
). As soon as the
REPEAT
button is
pressed again, the repeat function is deactivated.
2.13
PROG key (title programming and filter setting)
The
PROG
key (4) has different functions depending on the operating status of the CD player:
- If no CD is inserted, the key has
no function
- When the player is in
PLAY
or
PAUSE
mode:
Filter setting
(see section 2.8)
- If a CD is inserted and the player is in
STOP
mode: Title programming
2.13.1
Title programming, random playback (only in STOP state)
Press the
PROG
keys (4) to enter the programming menu.
Press the
STOP
key (9) to exit the programming menu.
Summary of Contents for CD 30.3
Page 1: ...Operating Instructions CD 30 3 ...
Page 2: ......