18
Battery Status (12V System Only)
B
This function reads the battery status. The response from the light is:
4 flashes = High Voltage
3 flashes = Good Voltage
2 flashes = Low Voltage
1 flashes = Cut-off Voltage or below
Example Key sequence:
T/C
T/C
R
B
Error/Acknowledge Indication
If the key sequence is invalid, or an out of bounds value is attempted to be set, the light
flashes 5 times for 1 second. (The command then needs to be sent from the start.)
Example key sequence:
(Set the intensity level to 5 – undefined.)
T/C
T/C
I
5
The light flashes 5 times for 1 second.
When a key sequence has been entered successfully the light will respond
acknowledgement with a 1 second flash.
