16
Optional IR Remote Control
The IR remote is used to communicate with Avlite lighting products
that have an IR sensor fitted. The remote control is used for the
following functions:
• Operational Mode: dusk-to-dawn, standby or always-on.
• Ambient Light Thresholds: read the current light thresholds,
configure new ambient light thresholds.
• Perform a battery health check.
On receiving a valid key signal from the IR Remote, the light will
flash once. The user should wait until the light responds to each
keypress before pressing another key. If there is no response to
the keypress after 3 seconds, it has not been detected by the light
and the key can be pressed again.
If an invalid key is detected, the light will flash quickly 5 times.
In this case, the command will have to be restarted.
Avlite IR Controller / Universal Remote Compatibility
If you lose your Avlite IR Controller, the following Universal Remote Controller has been tested
for compatibility: RCA Type RCR312WR programmed for Phillips TV Type Code 10054
T/C
T/C
Read
Lux
Flash Code
Intensity
Battery Status
Test / Configure
R
L
FC
I
B
3
4
5
6
7
8
9
0
1
2
Avlite Key
Universal Remote Key
T
Power
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
0
0
R
L
Mute
FC
I
Volume-
B
Channel-
