10
Unpacking, Installation, Wiring & Setup
Unpacking
Unpack all hardware and inspect for damage. If there is any damage,
please contact your Avlite Office.
Retain original packing material for possible future use in shipping.
Installation & Wiring
Before proceeding with installation or service, make sure the following conditions are met:
• Ensure the tower or mast is grounded (NO RF HAZARD)
• Check the mast lighting circuit is not faulty
• Ensure power lines are not ‘live’ (NO ELECTRICAL HAZARD)
• Avoid touching live circuits!
• Avoid touching any component or any part of the circuitry while the unit is operating.
Do not change components or make adjustments inside the unit with power on.
The obstruction light is manufactured with an input power cable of
length defined at the time of order. One end of the input power cable is
pre-terminated at the light fixture.
Connect the provided input power cable to the corresponding power
source in accordance with figure 1 for AC installations and figure 2 for
DC installations.
