AVLEX CORPORATION www.avlex.com
6655 Troost Avenue Kansas City, MO 64131
Fax (816) 581-9104 Toll Free: 877-447-9216
Avlex HS-48 Headworn Microphone Fitting and Handling Guide
The Avlex HS Standard Voice Grade Series of microphones are made of a lightweight, flexible soft metal. The ultra low
profile 0.7mm soft metal boom of the HS-48 bends easily but care should be taken when making adjustments to prevent
damaging the microphone. Please avoid bending the boom at a sharp angle. Use a round object or the edge of your
finger as a guide to prevent kinking the boom. Repeated bending in the same location will eventually cause a break in
the boom or internal wires. Do not attempt to bend the boom near the capsule or next to the cable connector.
LIMITED ONE YEAR WARRANTY
This Limited Warranty is extended by Avlex Corporation to the owner of any Avlex HS or HSP series microphone purchased in the United States of America, the
District of Columbia, Puerto Rico, or the US Virgin Islands. Avlex Corporation will repair or replace, at its sole option, any covered Avlex product that fails due to
a defect in material or workmanship within one year following the date of the initial user purchase.
Cables and windscreens are excluded from coverage under this warranty. Product failure caused by misuse, abuse, neglect, accident, improper wiring or improper
installation is not covered by this warranty.
This warranty does not cover any loss of time or income that may be caused by the failure of a warranted product. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above exclusion may not apply to you.
To obtain performance under this warranty, return the warranted product with proof of the purchase date to the place of purchase, or contact Avlex Corporation
Customer Support at 877-447-9216. A Customer Support Representative will go through the standard troubleshooting procedures in an effort to resolve the
problem. If it is necessary to return the product you will be given a return authorization (RA) number and shipping instructions. Please be certain to write this
information down. The product being returned along with the RA number, your contact information, and proof of purchase must be securely packed in an adequate
(corrugated) shipping carton. The RA number must be written on the outside of the shipping carton (on the shipping label). You will be responsible for freight
charges to Avlex and the product will be returned via UPS Ground with the shipping charges prepaid. Expedited shipping is available at an additional cost.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
The HS microphones use a replaceable, Kevlar covered cord. These cords are as light as possible in order to keep them
comfortable and provide low visibility. Use caution when wearing and removing the mic and bodypack to keep the cord
safe. Do not wrap excess cord around the bodypack. This will stress the cord and adapter and will result in the mini
coaxial connector being broken.
We're confident you'll find the Avlex HS-48 Standard Grade headworn microphone to be a truly excellent product.
Lightweight and comfortable, it will produce a clear natural sound for years to come. For additional information on the
HS Series of Avlex Microphones including videos regarding fitting and handling, please visit the Avlex microphone
section on our web site at www.avlex.com.
How to mount the HS-48 headworn microphone:
The distinctive flexible ear-hook is made with a self-adjusting soft spring polymer that
eliminates the frustration of getting a secure and comfortable fit regardless of who is using it!
It is extremely comfortable to wear and automatically adjusts to each wearer, staying in place
by applying consistent pressure regardless of ear size. It can easily be taken on and off by the
wearer and returns to its original shape each time.
The HS-48 may be used over the left or right ear. Carefully open the soft spring hook and
place it over your ear, let go of the spring. It’s that simple. The base of the ear-hook should
comfortably rest behind your earlobe.
Adjusting Boom Length and Placement:
The HS-48 features an adjustable boom that easily accommodates different face shapes and
helps eliminate pops and breath noise. Adjusting the length of the boom arm is a simple
operation. Grasp the base of the ear-hook and rotate the boom slightly while making length
adjustments to avoid undue stress to the boom arm. The optimum position is when the
capsule is located just behind the edge of your mouth.
For proper placement gently curve the boom to the right for left ear use or to the left for right
ear use. Use your thumb and forefinger to shape the boom carefully. Allow at least ½ inch of
straight boom next to the earpiece; this allows the headset to be properly held in position.
With the headset firmly on the ear, adjust the boom up or down for best capsule location. The
optimum position is when the capsule is located just behind the edge of your mouth when you
smile and about a half inch from the side of your face. Do not position the capsule directly in
front of the mouth. This will result in “pops” and breathing noise. The pickup pattern of the
HS-48 will allow for the mic to function well over a large area.
