manualshive.com logo in svg

Avizia CA 300, User'S Installation Manual, Page: 24 / 43

Share
Download
Avizia CA 300 User'S Installation Manual Download Page 24

Connecting to network

Change wireless settings

NOTE

Up to three wireless profiles can be stored on the 
network module� You can manage, edit, and 
delete profiles in the network module under:
NETWORK SETTINGS > WIRELESS > AP PROFILES

1�  Connect a network cable between the console network 

interface and a computer�

2�  Set the static IP address on the computer to 

192.168.1.75

 and Subnet Mask 

255.255.255.0

� 

The Gateway (WIN)/Router (MAC) address is not re-
quired�

3�  Open a new web browser window (IE9 or higher, 

Firefox, Chrome, or Safari) and enter the fol-
lowing IP address in the browser’s address bar: 

192.168.1.250

�

4�  The Network Module’s login page will appear� Login 

with the previously set credentials (default is admin/
admin unless it was previously changed)�

5�  Navigate to the appropriate pages to gather informa-

tion, create new configurations, or to edit existing 
settings� 

!

Consult your network administrator before 
making changes� Editing settings may cause 
the system to lose network connectivity�

6�  To connect to another wireless network, launch the 

setup wizard by clicking 

 (Wizard) at the top-right of 

the network module navigation bar�

Refer to the 

CA300 Network Configuration Guide

 found 

at 

http://avizia�com/support

 or detailed instruction on 

manual and advanced network configuration�

© 2017 Avizia Inc.  All rights reserved.  |  avizia.com  |  AVZ-CA300-DOC-UIG-04

CA300  |  Installation & User Guide

Connecting to network

24

|  Getting started

Summary of Contents for CA 300












































Reviews:

No comments