User-Programmable Ignition-Controlled Door Lock/Unlock
For the ultimate in security and convenience, the system is programmed to
automatically lock your doors when the ignition key is turned "ON" or the
engine is started, and will unlock when the ignition key is turned "OFF." This
feature can be programmed ON or OFF. (See the "Programming Table for
System Features" on page 11.)
Protected Valet Mode
You should place your system in Protected Valet Mode whenever your vehicle
is being serviced by mechanics, car wash personnel or driven by valet parking
attendants. While in the Protected Valet Mode, all alarm functions are
bypassed to prevent unauthorized or accidental operation. Remote-controlled
door lock/unlock , trunk release and all optional accessories will still operate.
To Turn On Protected Valet Mode
1. Turn your ignition key to the "ON" position or start the engine.
2. Flick the valet switch to the "ON" position.
3. The LED will turn on solid red to indicate the system is in Protected Valet
Mode.
4. Turn your ignition key to the "OFF" position.
To Turn Off Protected Valet Mode
1. Turn your ignition key to the "ON" position or start the engine.
2. Flick the valet switch to the "OFF" position.
3. The LED will turn off to indicate the system is no longer in Protected Valet
Mode.
4. Turn your ignition key to the "OFF" position
Remote-Controlled Valet
For your convenience, the system can be put into Valet mode via the remote
control. While in Remote-Controlled Valet, all alarm functions are bypassed.
To Activate Remote-Controlled Valet
1. Press the remote ARM/DISARM and SILENT buttons at the same time.
2. The parking lights will flash 4 times.
3. The LED will turn on solid red to indicate the alarm is now in
Remote-Controlled Valet.
6
Phoenix
2
Rev. A - Owner's Manual 0399
