®2002 Directed Electronics, Inc.
31
Quick Reference Guide
Arming
■
To arm, press
. When the system arms, you will hear two short chirps,
and the indicator lights will flash twice.
Disarming
■
To disarm, press
. You will hear a chirp, and the indicator lights will
flash once.
Siren Silencing
■
For siren silencing, press
on your transmitter (whist the siren is
sounding) and the siren will stop sounding. To completely disarm the
security system, press
again.
Disarming Without a Transmitter
■
Turn on the ignition. Press the Valet switch the number of times that cor-
responds with the first number of your Valet code. Turn the ignition off,
then back on. Press the Valet switch the number of times that corre-
sponds with the second digit of your Valet code. Turn the ignition off,
then back on. Press the Valet switch the number of times that corre-
sponds with the third digit of your Valet code. Turn the ignition off, then
back on again. Press the Valet switch the number of times that corre-
sponds with the fourth digit of the Valet code. Turn the engine off. If you
have entered the proper code, the alarm will emit two chirps and then
turn off. Five chirps indicate the wrong code has been entered. Re-enter
your Valet code starting at digit one.
Panic Mode
■
Press and hold
down for 3-4 seconds to activate Panic Mode. Press
to stop panic mode at any time.
Location of Valet Switch_______________________________
Valet PIN Number_____________________________________
Cut along dotted line and f
old f
or a quic
k and easy ref
erence to keep in y
our pur
se or wallet.
✂
✂
