®2002 Directed Electronics, Inc.
15
If the system was armed and a thief were to break into your vehi-
cle and begin entering codes at random in an attempt to disarm
the alarm, the system will lock out (indicated by a triple flash
sequence of the LED) and begin sounding the siren for two min-
utes. During this period the system will ignore further attempts to
enter the code. Even a correct code entry will be ignored. The siren
can be silenced and the system disarmed by pressing the
but-
ton on the remote control two times.
NOTE:
The PIN number noted on the back of this guide is your emergency
override code. Therefore, Do
NOT
leave the guide inside the vehicle for a
thief to find.
To Turn On Protected Valet Mode:
1.
Turn the ignition key to the ON position.
2.
Within 10 seconds, enter the first number in your PIN. Press
and release the Valet switch the same number of times as the
first digit in your PIN. Example: If your PIN is
2
345, press the
Valet switch
two
times.
3.
Turn the ignition key OFF.
4.
Turn the ignition key to the ON position.
5.
Enter the second number in your PIN. Press and release the
Valet switch the same number of times as the second digit in
your PIN. Example: If your PIN is 2
3
45, press the Valet switch
three
times.
6.
Turn the ignition key OFF.
