Required Installation Tools
Voltmeter
Wire Strippers
Electric Drill & Bits
Phillips Screw Driver
Convoluted Tubing *
Solder Gun *
Wire Crimpers
Shrink Tube or Electrical Tape
* Op tional
Important Information
1. Test all circuits with a voltmeter.
2. Make all wiring connections with butt connectors. DO NOT twist wires
or use “scotch-lok” connectors.
3. Route RED, RED/WHITE and BLACK wires from the control unit
directly to the battery.
4. Keep extensions as short as possible. Use same gauge wires.
5. Before installing, discuss the placement of the LED indicator and valet
switch with the vehicle owner. DO NOT disconnect the battery cables.
6. Make all connections by removing the lug from the cable clamp
without detaching clamp.
7. Turn off dome light or remove dome light fuse to prevent battery drain.
This device complies with Part 15 of the FCC rules. Any changes or
modifications made to the system without the express approval of Avital
Technologies, Inc. could void the user's authority to operate this
equipment.
3
Diablo
2
/AMX 68/AT-58 Installation Manual 3/31/99
