23
© 2009 Directed Electronics. All rights reserved.
➢
How to reset features and virtual tach
The Program switch, plugged into the blue port, is used for program-
ming. There is a basic sequence of steps to remember whenever pro-
gramming this unit: key, Choose, Activate and Release.
1.
Key.
Turn the ignition to the ON position.
2.
Choose.
Within 10 seconds, press and release
the Program switch the number of times correspond-
ing to the desired channel listed. Once you have
selected the channel, press the switch once
more and
HOLD
it. The LED flashes to confirm the
selected channel. Do not release the Program
switch.
Channel
Function
3
Reset Features: This resets all system features to the factory default
settings.
Note:
This feature does not reset the Virtual Tach setting.
4
Virtual Tach Reset: Deletes all previously learned values for Virtual
Tach, and on the next remote start sequence the unit begins virtual
tach initialization.
Note:
The “Zap” feature on the Bitwriter does not reset the Virtual
tach setting.
Note:
Channel 1 and 2 are unavailable.
3.
Activate input.
When the white/blue H1/4 is
pulsed the LED comes on solid to confirm the reset.
