25
Door lock learn routine
Before the unit will respond to the factory remote keyless system, it must
learn the polarity of the door lock wires. To learn the lock polarity:
It is important that all the INPUT signals to the control module
are in the rest status state (no activity) before entering the learn
routine.
To learn lock:
Make sure the doors, hood and trunk are closed so the factory system
operates as it would when the user is using it.
1. With all the doors, hood and trunk closed: Plug in all harnesses
(12 pin harness plugs in last )
2. Within 5-seconds: Press and hold the Valet switch.The LED flashes
once.
3. Immediately press the lock button on the OEM transmitter. The LED
will flash once confirming the lock was successfully learned then
will light up solid.
To learn unlock:
4. Within 3-seconds: Press and release the Valet switch once then
press and hold. The LED will flash twice.
5. Immediately press the unlock button on the OEM transmitter.
6. The LED will flash twice then light up solid confirming the unlock
was successfully learned.
7. Release the Valet switch.
8. Cycle the ignition switch to exit programming.
© 2009 directed electronics
N3001L_2009-04print.qxd 5/12/2009 11:14 AM Page 25
