Avital 2300, Installation Manual

Page: 21 / 33

21
© 2001 Directed Electronics, Inc. Vista, CA
This wire supply a (-)200mA output whenever the button(s) controlling channel four is pressed and will continue
until the button(s) is released. This output can be used to control optional accessories.
IMPORTANT! Never use this wire to drive anything but a relay or a low-current input! This
transistorized output can only supply (-)200 mA, and connecting directly to a solenoid, motor, or
other high-current device will cause the module to fail.
NOTE: Many of the options that can be operated with this output require the addition of the relay
accessory package ( p/n 8617 ).
starter interrupt harness (H4) wire connection guide
______
______
Use one of these wire as a starter interrupt input and the other as a starter interrupt output wire.
NOTE: These two black wires are interchangeable.
H4/1 and H4/2 BLACK starter interrupt wires
BLACK STARTER INTERRUPT OUTPUT
BLACK STARTER INTERRUPT INPUT
H4/1
H4/2
H3/3 VIOLET/BLACK (-) 200 mA channel 4 output