Avision FF-1001H User Manual Download Page 94

Page: 94 / 106

User’s Manual

Maintenance

7.1

Cleaning the ADF

From time to time the pad assembly and feeding rollers may

become contaminated with ink, toner particles or paper

dust. In this case the scanner may not feed documents

smoothly. If this occurs please follow the cleaning

procedures to return your machine to its original state.

The Cleaning Procedures

1) Soak a cotton swab with some isopropyl alcohol. (95%).
2) Press the ADF Release button on the upper-left. Open the

front door slightly to the left. Wipe the upper feeding roller

by moving the swab from side to side. Rotate the roller

forward with your finger and repeat the cleaning steps

above until the entire roller is cleaned.

3) Wipe the ADF pad in one direction from top to bottom or

the other way around. Be careful not to damage the pick

springs.

4) Close the scanner front door. Your scanner is now ready

for use.

ADF Release

button

7-1

Summary of Contents for FF-1001H











































































































Search results

Summary of Contents for FF-1001H

Reviews:

Related manuals for FF-1001H

Brands by name

Popular brands

Avision FF-1001H, User Manual

Search results

Summary of Contents for FF-1001H

Reviews:

Related manuals for FF-1001H

Brands by name

Popular brands