Avision FF-1001H User Manual Download Page 50

Page: 50 / 106

User’s Manual

4.4

The Color Dropout Tab

4.4.1

Color Dropout Selection

Color Dropout tab allows you to drop either of the red, blue, or

green color in your scanned image. If your image contains red

color watermark or background, choose the R (Red) channel

then any red watermark or background will be removed. This

feature is used to sharpen your text when using OCR (Optical

Character Recognition) software.
The “Custom” option allows you to specify your desired color to

be removed by entering its RGB (Red, Green, and Blue) value

respectively.

Tolerance: Specify the allowable color range to be removed for

the color you selected. Specified range: 1 ~ 100

The large the numeric value, the wider the color dropout range

is.

Note that this function supports only black & white and gray
images. Therefore, be sure to choose any black & white or
gray image type while applying this function.

4-25

Summary of Contents for FF-1001H











































































































Search results

Summary of Contents for FF-1001H

Reviews:

Brands by name

Popular brands

Avision FF-1001H, User Manual

Search results

Summary of Contents for FF-1001H

Reviews:

Brands by name

Popular brands