Avision AN360W, User Manual, Page: 166 / 207

158
The Setting Tab
The Setting tab allows you to set the following settings:
The Setting tab dialog box
Energy
Saving
Control Check the Enable Energy Saver box and move the slider to
set the amount of time to start the energy saver after your
last action. The range is from 1 to 60 minutes.
Enable Power
Off Check the Enable Power Off box and move the slider to set
the amount of time to automatically turn off the scanner after
your last action. The range is from 1 to 480 minutes. The
default is 240 minutes (4 hours). Note the value of “Power
Off” has to be greater than or equal to the value of “Energy
Saving”.