![background image](http://html1.mh-extra.com/html/avira/ntfs-for-dos-personal/ntfs-for-dos-personal_user-manual_3032001015.webp)
Working with Avira NTFS4DOS
5.2
Command line parameters
You can start Avira NTFS4DOS at any time via the command line.
Avira NTFS4DOS supports the following command line parameters:
Parameter
Description
/lX
Sets the letter of the first used drive. For example,
lC
means that the first
partition detected contains the letter
C
.
/rX
Sets the RAM disk size. For example,
r4
means that Avira NTFS4DOS was
designed with a 4MB RAM disk.
/?
Displays a help screen.
When starting, Avira NTFS4DOS automatically loads a new shell, or a program run as a
shell. If no shell is specified, Avira NTFS4DOS uses the default shell (
command.com
).
After completing work with Avira NTFS4DOS, you can stop the shell and thus also
release the memory used by NTFS4DOS again.
Examples for calling Avira NTFS4DOS
Example 1
NTFS4DOS /lF /r8 command.com /C mybatch.bat
f
This command starts Avira NTFS4DOS to connect the detected NTFS partitions,
starting from the drive letter
F
, and creates an 8 MB RAM disk. The RAM disk
contains the first free drive letter for every connected NTFS drive.
f
The file
mybatch.bat
is executed in a new shell.
f
After executing the file
mybatch.bat
, Avira NTFS4DOS stops automatically, because
the shell parameter
/C
was called. Please refer to the DOS operating system
documentation for information on all possible shell parameters.
Example 2
NTFS4DOS F:\AntiVir\avcmd.exe
f
This command starts Avira NTFS4DOS to connect to all NTFS partitions found,
starting with the first available drive letter, without creating a RAM disk.
f
The anti-virus scanner is run in a new shell.
f
When this ends, Avira NTFS4DOS turns off again.
Avira GmbH
Avira NTFS4DOS Personal
13
Summary of Contents for NTFS FOR DOS PERSONAL
Page 1: ...MORE THAN SECURITY www avira com User Manual Avira NTFS4DOS Personal...
Page 2: ......
Page 4: ......
Page 21: ......