Graphical User Interface (GUI)
70
AntiVir WebGate
Avira GmbH
In this window you can set the access and connections to specific ports for certain
Clients or networks.
Allow
client
address
Enter the IP address of the Client you want to have access through WebGate and
press
Add
. If you want to enable a network, enter the IP address, followed by ’/’ and
the Bit number of the netmask. For example,
192.168.1.0 or 192.168.1.0/24
Allow
destination
port
Enter the ports, for which you want to allow the access through WebGate.
Configuring WebGate
Log in as
root
.
Start WebGate GUI:
/usr/lib/AntiVir/antivir-gui
Define the basic settings in
Basic WebGate Settings
– Page 63.
Define the extended settings. If you are not sure about possible values (for
example, the maximum number of connections allowed), keep the default
value. You can modify and tune these values during operation or when eventual
conflicts occur.
If you are using WebGate with a proxy, make the
Proxy Settings
– Page 66
accordingly. You can read about the basic configurations in
Monitoring HTTP
Traffic
– Page 26.
Set the parameters for scanning archives, if you want to activate this feature.
Select the malware types you want WebGate to detect.
Make the settings for the logfile and email messages in the area for
Logfile
Settings
– Page 68.
Press
Save
to keep the values you set.
The new settings are now activated.
Summary of Contents for ANTIVIR UNIX WEBGATE
